- The Social Impact of the Steel Industry in Belgium, China, and the United States: A Social Lifecycle Assessment (s-LCA)-Based Assessment of the Replacement of Fossil Coal with Waste Wood
- Volatilization Mechanism of Group Elements in Ti6Al4V During Electron Beam Cold Hearth Melting
- A Kinetic Study on the Leaching of Scheelite Sulfuric Acid Decomposition Residue with Hydrogen Peroxide
- Hydrometallurgical Recovery of Valuable Metals from Hazardous Petrochemical Industry Waste and Kinetic Investigation
- Effect of MgO on Vacuum Carbothermal Reduction Mechanism of Ca3(PO4)2 in SiO2–C–Ca3(PO4)2–MgO-Based System
- Chemical Range of Stability for Self-Dusting Ladle Furnace Slags and Destabilizing Effect of Sulfur
- Measurement of SnO Activity Coefficient in CaO–SiO2–FetO–Al2O3 Slag Saturated with Fe
- Additive Effect of Al2O3, CaO, and MgO on the Viscosity of FeOx–SiO2 Slag Melt (x = 1.0–1.5)
- Characterization of High Sulfur Bauxite and Its Phase Transformation During Desulfurization: A Perspective from Process Mineralogy
- Recovery and Purification of Iridium from Secondary Resources: A Review
- Effect of Composition on Low-Temperature Soda Roasting of Boron-Rich Blast Furnace Slag
- Challenges and Opportunities of Agricultural Biomass as a Replacement for PCI Coal in the Ironmaking Blast Furnace: A Review
- Hydrometallurgical Routes to Close the Loop of Electric Vehicle (EV) Lithium-Ion Batteries (LIBs) Value Chain: A Review
- Chlorination of ZnFe2O4 by Molten MgCl2: Effect of Adding CaCl2
- Oxidative Dissolution of Cemented Tungsten Carbides in Molten Sodium Carbonate by Addition of Copper(I) Oxide as Oxidizing Agent for Tungsten Recycling
- Phase Diagram of CaO–Al2O3–V2O5 Slag System at 1500 °C and 1600 °C
- Optimized Conditions for Extracting Fe–Ni–Co–Cu Alloy from Polymetallic Nodules
- Correction: Chlorination of ZnFe2O4 by Molten MgCl2: Effect of Adding CaCl2
- Decomposition Mechanism of Scheelite based on Sodium Bisulfate Roasting
- New Insights into Improving the Physicochemical Properties and Flotation Behavior of Pyrite Interfaces from Cyanide Tailings